CONFAST®

5/8" Machine Screw Anchor, 15/Box

(No reviews yet) Write a Review
SKU:
MS58
UPC:
820274000915
Availability:
In Stock, Ships Today!
$72.05

Description

Products Features 
  • SHALLOW EMBEDMENT​ ​OPPORTUNITIES:  Less time required to drill hole 
  • NATIONAL COARSE THREADS:  Bolts and threaded rod is most common type available 
  • INTERNAL THREADS:  Allows for multiple bolting​ ​and unbolting​ ​without affecting holding values 
  • WORKS IN MOST​ ​MASONRY MATERIAL:  Consistent holding​ ​values in wide variety of base materials 
  • RUST​ ​RESISTANT:  Can be used in applications where moisture is present; easier maintenance 
Products specifications 
Bit Size 1-1/8" 
Box Qty 15 
Minimum Embedment 1-3/4" 
Minimum Edge Distance 5-5/8" 
Minimum Fixture Hole Diameter (In Place) 1-1/4" 
Minimum Fixture Hole Diameter (Hole Spotted) 5/8" 
Inside Anchor Diameter-Bolt Diameter 5/8" 
Outside Anchor Diameter 1-1/8" 
Internal Thread Length 1-1/2" 
Brand Name CONFAST® 
Minimum Spacing 11-1/4" 
Maximum Torque 18 ft./lbs. 
Bolt Length Fixture Thickness + Embedment Depth 
2000 PSI Concrete - Pull-Out (lbs.) * 2132 
Length Measurement End to End 
Diameter 5/8" 
Length 1-3/4" 
Material Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy 
Environment Moist 
Type Female 
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Installation Video 
Installing a 5/8" Machine Screw Anchor 
  1. Drill a 1-1/8" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15. 
  2. The depth of the hole can be deeper or equal to the minimum embedment depth of 1-3/4" which is equal to the length of the anchor . 
  3. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb. 
  4. Insert the anchor into the hole with the threaded cone end first. 
  5. Take the correct 5/8" Machine Screw Anchor setting tool and insert the smaller diameter end into the open end of the 5/8" Machine Screw Anchor.  
  6. Strike the end of the setting tool with a hammer until the anchor is fully set. 
  7. The 5/8" Machine Screw Anchor is now set. A 5/8" diameter bolt can be inserted into the 5/8" Machine Screw Anchor with a maximum torque of 18 ft. lbs. 
  8. Always use proper personal protective equipment per manufacturer's and OSHA instructions. 

Application Photos 

5/8" machine screw anchor - brick - unistrut pipe 5/8" machine screw anchor - brick - roof ladder 5/8" machine screw anchor - block - electric unistrut

View AllClose

Additional Information

Bit Size:
1-1/8"
Minimum Embedment:
1-3/4"
Material:
Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy
Environment:
Moist
2000 PSI Concrete - Pull-Out (lbs.) *:
2132
Type:
Female
Diameter:
5/8"
Length:
1-3/4"
Box Qty:
15
Minimum Spacing:
11-1/4"
Minimum Edge Distance:
5-5/8"
Minimum Fixture Hole Diameter (In Place):
1-1/4"
Minimum Fixture Hole Diameter (Hole Spotted):
5/8"
Inside Anchor Diameter-Bolt Diameter:
5/8"
Outside Anchor Diameter:
1-1/8"
Internal Thread Length:
1-1/2"
Length Measurement:
End to End
Bolt Length:
Fixture Thickness + Embedment Depth
Brand Name:
CONFAST
View AllClose
We're currently collecting product reviews for this item. In the meantime, here are some reviews from our past customers sharing their overall shopping experience.
4.8
Out of 5.0
A graph showing this site's review totals.
Overall Rating
98%
of customers that buy
from this merchant give
them a 4 or 5-Star rating.
Verified Buyer
03/27/2025 by John S. (California , United States)
“Thanks very much Brian for expertise and recommendations. I greatly appreciate that! Very.Well.Done!!”
Verified Buyer
03/25/2025 by David F. (United States)
“Good technical information about product”
Verified Buyer
03/22/2025 by Ray L. (United States)
“easy website”