American Made ThunderDrop®

5/8" American Made Drop-In Anchor Zinc Plated, 25/Box

(No reviews yet) Write a Review
SKU:
ADI58
UPC:
820274900031
Availability:
In Stock, Ships Today!
$341.90

Description

Products Features 
  • STAMPED WITH "USA":  Meets most requirements of Made in America
  • SMOOTH ANCHOR BODY:  Provides excellent and consistent holding values in concrete
  • INTERNAL NATIONAL COARSE THREADS:  Most common threads makes locating threaded rod or bolt fast and easy
  • PRECISION CUT EXPANSION END:  Provides for uniform expansion during the installation process
  • NO LIPPED ANCHOR DESIGN:  Anchor can be installed at a depth deeper than the anchor body length to provide opportunity for greater holding values
Products specifications 
Bit Size 7/8"
Box Qty 25
Minimum Embedment 2-1/2"
Primary  Concrete only
Minimum Edge Distance 4-3/8"
Minimum Fixture Hole Diameter (In Place) 1"
Minimum Fixture Hole Diameter (Hole Spotted) 5/8"
Inside Anchor Diameter-Bolt Diameter 5/8"
Outside Anchor Diameter 7/8"
Internal Thread Length 1-3/16"
Brand Name  ThunderDrop
Minimum Spacing 8-3/4"
Maximum Torque 40 ft./lbs.
Bolt Length  Fixture Thickness + Embedment Depth
Country  American Made
2000 PSI Concrete - Pull-Out (lbs.) * 3323
Length Measurement  End to End
Diameter 5/8"
Length 2-1/2"
Material  Carbon Steel Zinc Plated
Environment  Dry
Type  Female
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Application Video 

Installation Video 
Installing a 5/8" American Made Drop-In Anchor Zinc Plated
  1. Drill a 7/8" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
  2. The depth of the hole can be deeper or equal to the minimum embedment depth of 2-1/2" which is equal to the length of the anchor .
  3. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
  4. Insert the anchor into the hole with the open threaded end facing up.
  5. Take the correct 5/8" American Made Drop-In Anchor Zinc Plated setting tool and insert the smaller diameter end into the threaded portion of the 5/8" American Made Drop-In Anchor Zinc Plated.
  6. Strike the end of the setting tool with a hammer until the anchor is fully set.
  7. The 5/8" American Made Drop-In Anchor Zinc Plated is now set. A 5/8" diameter threaded rod or a bolt can be inserted into it with a maximum torque of 40 ft./lbs.
  8. Always use proper personal protective equipment per manufacturer's and OSHA instructions.

View AllClose

Additional Information

Bit Size:
7/8"
Minimum Embedment:
2-1/2"
Type:
Female
Primary:
Concrete only
Environment:
Dry
2000 PSI Concrete - Pull-Out (lbs.) *:
3323
Diameter:
5/8"
Length:
2-1/2"
Material:
Carbon Steel Zinc Plated
Box Qty:
25
Minimum Spacing:
8-3/4"
Minimum Edge Distance:
4-3/8"
Minimum Fixture Hole Diameter (In Place):
1"
Minimum Fixture Hole Diameter (Hole Spotted):
5/8"
Maximum Torque:
40 ft./lbs.
Inside Anchor Diameter-Bolt Diameter:
5/8"
Outside Anchor Diameter:
7/8"
Internal Thread Length:
1-3/16"
Length Measurement:
End to End
Bolt Length:
Fixture Thickness + Embedment Depth
Brand Name:
ThunderDrop
View AllClose

Related Products

Related Products

Picture of 7/8" x 6" Hammer Bit, Each
Add to Cart
Quick view

7/8" x 6" Hammer Bit, Each

TruCut®

$39.97
Products Features TRICARB® CARBIDE:  Guarantees longer bit life and speedier penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN:  Faster dust removal allows...
Picture of 7/8" x 6-3/4" SDS Bit, Each
Add to Cart
Quick view

7/8" x 6-3/4" SDS Bit, Each

TruCut®

$72.48
Products Features TRICARB® CARBIDE:  Longer bit life and quick penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN:  Faster dust removal provides faster...