CONFAST®

3/8" Lag Shield Anchor Short, 50/Box

(No reviews yet) Write a Review
SKU:
LSS38
UPC:
820274000755
Availability:
In Stock, Ships Today!
$50.90

Description

Products Features 
  • EASY TO​ ​INSTALL:  Fast, secure installation 
  • EASY TO​ ​REMOVE:  Simply turn clockwise and back the screw out of the hole 
  • ONE PIECE DESIGN:  No nuts or washers the anchor comes complete 
Products specifications 
Bit Size 5/8" 
Box Qty 50 
Minimum Embedment 1-3/4" 
Thread Type 3/8" - 7 
Minimum Edge Distance 3-1/8" 
Minimum Fixture Hole Diameter (In Place) 3/4" 
Minimum Fixture Hole Diameter (Hole Spotted) 3/8" 
Inside Anchor Diameter-Bolt Diameter 3/8" 
Outside Anchor Diameter 5/8" 
Internal Thread Length 1" 
Brand Name CONFAST® 
Maximum Torque 10 ft./lbs. 
Bolt Length Fixture Thickness + Embedment Depth 
2000 PSI Concrete - Pull-Out (lbs.) * 442 
Length Measurement End to End 
Diameter 3/8" 
Length 1-3/4" 
Material Zamac 
Environment Wet 
Type Female 
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Installation Video 
Installing a 3/8" Lag Shield Anchor Short 
  1. Drill a 5/8" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15. 
  2. The depth of the hole can be deeper or equal to the minimum embedment depth of 1-3/4" which is equal to the length of the anchor . 
  3. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb. 
  4. Insert the anchor in the hole with the closed end of the lag shield inserted first.  
  5. Place the fixture over the 3/8" Lag Shield Anchor Short, insert a 3/8" diameter lag screw through the fixture and into the 3/8" Lag Shield Anchor Short. 
  6. Use a wrench to turn the lag screw clockwise until tight or maximum torque value 10 ft./lbs. is reached. 
  7. Always use proper personal protective equipment per manufacturer's and OSHA instructions. 

Product Video 

Application Photos 
3/8" lag shield short - brick - gas line 3/8" lag shield short - brick - stair railing 3/8" lag shield short - block - gutter strap 3/8" lag shield short - block - hand railing
View AllClose

Additional Information

Bit Size:
5/8"
Minimum Embedment:
1-3/4"
Thread Type:
3/8" - 7
Material:
Zamac
Environment:
Wet
2000 PSI Concrete - Pull-Out (lbs.) *:
442
Type:
Female
Diameter:
3/8"
Length:
1-3/4"
Box Qty:
50
Minimum Edge Distance:
3-1/8"
Minimum Fixture Hole Diameter (In Place):
3/4"
Minimum Fixture Hole Diameter (Hole Spotted):
3/8"
Maximum Torque:
10 ft./lbs.
Inside Anchor Diameter-Bolt Diameter:
3/8"
Outside Anchor Diameter:
5/8"
Internal Thread Length:
1"
Length Measurement:
End to End
Bolt Length:
Fixture Thickness + Embedment Depth
Brand Name:
CONFAST
View AllClose

Related Products

Related Products

Picture of 5/8" x 6" Hammer Bit, Each
Add to Cart
Quick view

5/8" x 6" Hammer Bit, Each

TruCut®

$22.49
Products Features TRICARB® CARBIDE:  Guarantees longer bit life and speedier penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN:  Faster dust removal allows...
Picture of 5/8" x 6-3/4" SDS Bit, Each
Add to Cart
Quick view

5/8" x 6-3/4" SDS Bit, Each

TruCut®

$27.50
Products Features TRICARB® CARBIDE:  Longer bit life and quick penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN:  Faster dust removal provides faster...