ITW/Buildex®
1/4" x 4" Tapcon Hex Carbon Steel Blue Climaseal® Coated HW4-400, 100/Box
(No reviews yet)
Write a Review
- SKU:
- CSH144;T
- UPC:
- 092097951488
- MPN:
- HW-4400
- Availability:
- In Stock, Ships Today!
Description
Products Features
- LOWER INSTALLATION TORQUE: Fast easy installation; saves time
- HIGHER HOLDING VALUES: Higher quality installation; optimal holding strength
- CLIMASEAL® COATING: Provides long-lasting rust resistance exterior
Products specifications
| Bit Size | 3/16" |
| Box Qty | 100 |
| Minimum Embedment | 1" |
| Head Type | Hex Washer |
| Thread Type | Threadform Technology™ |
| Minimum Edge Distance | 3" |
| Maximum Fixture Thickness | 3" |
| Minimum Fixture Hole Diameter (In Place) | 5/16" |
| Minimum Fixture Hole Diameter (Hole Spotted) | 5/16" |
| Brand Name | ITW/Buildex |
| Driver Size | 5/16" |
| Minimum Spacing | 4" |
| Thread Length | 1-3/4" |
| 2000 PSI Concrete - Pull-Out (lbs.) * | 750 |
| 2000 PSI Concrete - Shear (lbs.) * | 900 |
| Length Measurement | Underneath head |
| Diameter | 1/4" |
| Length | 4" |
| Material | Carbon Steel Blue Climaseal® Coated |
| Environment | Dry to Moist |
| Type | Male |
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Installation Video
Installing a 1/4" (four inches) x 4" (four inches) Hex Tapcon® Concrete Screw - Drill a 3/16" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
- Drill the hole a 1/2" deeper than the anchor will penetrate the concrete, making sure the minimum embedment requirements of 1" is met.
- The hole can be drilled while the fixture is in place. The minimum hole in the fixture for the 1/4" (four inches) x 4" (four inches) Hex Tapcon® Concrete Screw is 5/16".
- Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
- Insert the point of the 1/4" (four inches) x 4" (four inches) Hex Tapcon® Concrete Screw into the hole. Make sure that the screw being installed will penetrate the base material a minimum of 1" but no deeper than 1-3/4".
- Using a 5/16" nut driver hex driver for the anchor , turn the screw clockwise, applying slight pressure until the head of the screw is snug against the material being fastened.
- Always use proper personal protective equipment per manufacturer's and OSHA instructions.
Product Video
Application Photos
Installation DocumentAdditional Information
Bit Size: |
3/16" |
Minimum Embedment: |
1" |
Thread Length: |
1-3/4" |
Environment: |
Dry to Moist |
Material: |
Carbon Steel Blue Climaseal® Coated |
Thread Type: |
Threadform Technology™ |
2000 PSI Concrete - Pull-Out (lbs.) *: |
750 |
2000 PSI Concrete - Shear (lbs.) *: |
900 |
Type: |
Male |
Diameter: |
1/4" |
Length: |
4" |
Box Qty: |
100 |
Minimum Spacing: |
4" |
Minimum Edge Distance: |
3" |
Maximum Fixture Thickness: |
3" |
Minimum Fixture Hole Diameter (In Place): |
5/16" |
Minimum Fixture Hole Diameter (Hole Spotted): |
5/16" |
Head Type: |
Hex Washer |
Length Measurement: |
Underneath head |
Driver Size: |
5/16" |
Brand Name: |
ITW/Buildex |
Related Products
Related Products
1/4" x 4" Hex Head CONFAST® Concrete Screw, 100/Box
CONFAST®
$29.69
Products Features
COMPLETE LINE: Ensures correct product can be located and purchased for any job
ALL LENGTHS ARE AVAILABLE: Using the correct length...
1/4" x 4" Flat Phillips CONFAST® Concrete Screw, 100/Box
CONFAST®
$32.98
Products Features
COMPLETE LINE: Ensures correct product can be located and purchased for any job
ALL LENGTHS ARE AVAILABLE: Using the correct length...
1/4" x 4" Tapcon Flat Phillips Carbon Steel Blue Climaseal® Coated PF4-400, 100/Box
ITW/Buildex®
$59.86
Products Features
LOWER INSTALLATION TORQUE: Fast easy installation; saves time
HIGHER HOLDING VALUES: Higher quality installation; optimal holding...
1/4" x 4" Ultracon 410 Stainless Steel Silver Climaseal® Coated SHW4-400, 100/Box
Ultracon®
$328.72
Products Features
LOWER INSTALLATION TORQUE: Fast easy installation; saves time
HIGHER HOLDING VALUES: Higher quality installation; optimal holding...
1/4" x 4" Tapcon Flat Phillips 410 Stainless Steel Silver Climaseal® Coated SPF4-400, 100/Box
Ultracon®
$281.00
Products Features
LOWER INSTALLATION TORQUE: Fast easy installation; saves time
HIGHER HOLDING VALUES: Higher quality installation; optimal holding...
3/16" x 6" Hammer Bit, Each
TruCut®
$6.26
Products Features TRICARB® CARBIDE: Guarantees longer bit life and speedier penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN: Faster dust removal allows...
3/16" x 6-5/8" SDS Bit, Each
TruCut®
$13.06
Products Features TRICARB® CARBIDE: Longer bit life and quick penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN: Faster dust removal provides faster...