ITW/Buildex®
1/4" x 1-1/4" Tapcon 410 Stainless Steel Silver Climaseal® Coated SHW4-114, 100/Box
(No reviews yet)
Write a Review
- SKU:
- CSHS14114;T
- UPC:
- 092097909458
- MPN:
- SHW-4114
- Availability:
- In Stock, Ships Today!
Description
Products Features
- LOWER INSTALLATION TORQUE: Fast easy installation; saves time
- HIGHER HOLDING VALUES: Higher quality installation; optimal holding strength
- CLIMASEAL® COATING: Provides long-lasting rust resistance exterior
Products specifications
| Bit Size | 3/16" |
| Box Qty | 100 |
| Minimum Embedment | 1" |
| Head Type | Hex Washer |
| Thread Type | Hi-Lo |
| Minimum Edge Distance | 3" |
| Maximum Fixture Thickness | 1/4" |
| Minimum Fixture Hole Diameter (In Place) | 5/16" |
| Minimum Fixture Hole Diameter (Hole Spotted) | 5/16" |
| Brand Name | ITW/Buildex |
| Driver Size | 5/16" |
| Minimum Spacing | 4" |
| Thread Length | 1-1/4" |
| 2000 PSI Concrete - Pull-Out (lbs.) * | 750 |
| 2000 PSI Concrete - Shear (lbs.) * | 900 |
| Length Measurement | Underneath head |
| Diameter | 1/4" |
| Length | 1-1/4" |
| Material | 410 Stainless Steel Silver Climaseal® Coated |
| Environment | Moist |
| Type | Male |
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Application Video
Installation Video
Installing a 1/4" x 1-1/4" 410 Stainless Steel Hex Tapcon® - Drill a 3/16" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
- Drill the hole a 1/2" deeper than the anchor will penetrate the concrete, making sure the minimum embedment requirements of 1" is met.
- The hole can be drilled while the fixture is in place. The minimum hole in the fixture for the 1/4" x 1-1/4" 410 Stainless Steel Hex Tapcon® is 5/16".
- Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
- Insert the point of the 1/4" x 1-1/4" 410 Stainless Steel Hex Tapcon® into the hole. Make sure that the screw being installed will penetrate the base material a minimum of 1" but no deeper than 1-3/4".
- Using a 5/16" nut driver hex driver for the anchor , turn the screw clockwise, applying slight pressure until the head of the screw is snug against the material being fastened.
- Always use proper personal protective equipment per manufacturer's and OSHA instructions.
Product Video
Application Photos
Installation DocumentAdditional Information
Bit Size: |
3/16" |
Minimum Embedment: |
1" |
Thread Length: |
1-1/4" |
Environment: |
Moist |
Material: |
410 Stainless Steel Silver Climaseal® Coated |
Thread Type: |
Hi-Lo |
2000 PSI Concrete - Pull-Out (lbs.) *: |
750 |
2000 PSI Concrete - Shear (lbs.) *: |
900 |
Type: |
Male |
Diameter: |
1/4" |
Length: |
1-1/4" |
Box Qty: |
100 |
Minimum Spacing: |
4" |
Minimum Edge Distance: |
3" |
Maximum Fixture Thickness: |
1/4" |
Minimum Fixture Hole Diameter (In Place): |
5/16" |
Minimum Fixture Hole Diameter (Hole Spotted): |
5/16" |
Head Type: |
Hex Washer |
Length Measurement: |
Underneath head |
Driver Size: |
5/16" |
Brand Name: |
ITW/Buildex |
Related Products
Related Products
1/4" x 1-1/4" CONFAST® 410 Stainless Steel Hex Washer Head Masonry Screw, 50/Box
CONFAST®
$20.29
Products Features COMPLETE LINE: Ensures correct product can be located and purchased for any job ALL LENGTHS ARE AVAILABLE: Using the correct length screw...
1/4" x 1-1/4" Hex Head Stainless Steel CONFAST® Concrete Screw, 50/Box
CONFAST®
$28.99
Applications The anchor is made from 410 Stainless Steel, and is Silver. This anchor is designed for use in Concrete, Block, and Brick
Environment The anchor is designed for use in a moist...
3/16" x 4" Hammer Bit, Each
TruCut®
$4.40
Products Features TRICARB® CARBIDE: Guarantees longer bit life and speedier penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN: Faster dust removal allows...
3/16" x 4-3/8" SDS Bit, Each
TruCut®
$10.01
Products Features TRICARB® CARBIDE: Longer bit life and quick penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN: Faster dust removal provides faster...