American Made ThunderDrop®
1/4" American Made Drop-In Anchor 303 Stainless Steel, 100/Box
- SKU:
- ADIS14
- UPC:
- 820274900055
- Availability:
- In Stock, Ships Today!
Description
Products Features
- STAMPED WITH "USA": Meets most requirements of Made in America
- SMOOTH ANCHOR BODY: Provides excellent and consistent holding values in concrete
- INTERNAL NATIONAL COARSE THREADS: Most common threads makes locating threaded rod or bolt fast and easy
- PRECISION CUT EXPANSION END: Provides for uniform expansion during the installation process
- NO LIPPED ANCHOR DESIGN: Anchor can be installed at a depth deeper than the anchor body length to provide opportunity for greater holding values
- 303 STAINLESS STEEL: Can be used in wet environments and will not rust over time
Products specifications
Bit Size | 3/8" |
Box Qty | 100 |
Minimum Embedment | 1" |
Primary | Concrete only |
Thread Type | 1/4" - 20 |
Minimum Edge Distance | 1-7/8" |
Minimum Fixture Hole Diameter (In Place) | 7/16" |
Minimum Fixture Hole Diameter (Hole Spotted) | 1/4" |
Inside Anchor Diameter-Bolt Diameter | 1/4" |
Outside Anchor Diameter | 3/8" |
Internal Thread Length | 7/16" |
Brand Name | ThunderDrop |
Minimum Spacing | 3-3/4" |
Maximum Torque | 5 ft./lbs. |
Bolt Length | Fixture Thickness + Embedment Depth |
Country | American Made |
2000 PSI Concrete - Pull-Out (lbs.) * | 939 |
Length Measurement | End to End |
Diameter | 1/4" |
Length | 1" |
Material | 303 Stainless Steel |
Environment | Wet |
Type | Female |
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Application Video
Installation Video
Installing a 1/4" American Made Drop-In Anchor (three zero three) 303 Stainless Steel
- Drill a 3/8" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
- The depth of the hole can be deeper or equal to the minimum embedment depth of 1" which is equal to the length of the anchor .
- Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
- Insert the anchor into the hole with the open threaded end facing up.
- Take the correct 1/4" American Made Drop-In Anchor (three zero three) 303 Stainless Steel setting tool and insert the smaller diameter end into the threaded portion of the 1/4" American Made Drop-In Anchor (three zero three) 303 Stainless Steel.
- Strike the end of the setting tool with a hammer until the anchor is fully set.
- The 1/4" American Made Drop-In Anchor (three zero three) 303 Stainless Steel is now set. A 1/4" diameter threaded rod or a bolt can be inserted into it with a maximum torque of 5 ft./lbs.
- Always use proper personal protective equipment per manufacturer's and OSHA instructions.
Additional Information
Bit Size: |
3/8" |
Minimum Embedment: |
1" |
Thread Type: |
1/4" - 20 |
Primary: |
Concrete only |
Environment: |
Wet |
2000 PSI Concrete - Pull-Out (lbs.) *: |
939 |
Type: |
Female |
Diameter: |
1/4" |
Length: |
1" |
Material: |
303 Stainless Steel |
Box Qty: |
100 |
Minimum Spacing: |
3-3/4" |
Minimum Edge Distance: |
1-7/8" |
Minimum Fixture Hole Diameter (In Place): |
7/16" |
Minimum Fixture Hole Diameter (Hole Spotted): |
1/4" |
Maximum Torque: |
5 ft./lbs. |
Inside Anchor Diameter-Bolt Diameter: |
1/4" |
Outside Anchor Diameter: |
3/8" |
Internal Thread Length: |
7/16" |
Length Measurement: |
End to End |
Bolt Length: |
Fixture Thickness + Embedment Depth |
Brand Name: |
ThunderDrop |