CONFAST®

1/4" 316 Stainless Steel Drop-In Anchor, 100/Box

(No reviews yet) Write a Review
SKU:
DIS31614
UPC:
820274000472
Availability:
In Stock, Ships Today!
$705.87

Description

Products Features 
  • SMOOTH WALL DESIGN:  Provides contact along​ ​length of expansion area; provides consistent holding values; aesthetic appeal 
  • INTERNAL NATIONAL COARSE THREADS:  Common threads create easier ​selection of threaded rod or bolt 
  • IDEAL FOR FLUSH MOUNTING: Nothing​ ​protrudes above surface of the concrete once anchor is properly installed 
  • MOST​ ​CONSISTENT​ ​HOLDING VALUES:  Can be used in solid concrete as an internally threaded concrete fastener 
  • SLOTTED BODY IS PRECISION MATCHED TO TAPERED EXPANSION PLUG:  Ensures that the anchor is uniformly expanded ​to provide consistent holding​ ​value 
Products specifications 
Bit Size 3/8" 
Box Qty 100 
Minimum Embedment 1" 
Primary Concrete only 
Thread Type 1/4" - 20 
Minimum Edge Distance 1-7/8" 
Minimum Fixture Hole Diameter (In Place) 7/16" 
Minimum Fixture Hole Diameter (Hole Spotted) 1/4" 
Inside Anchor Diameter-Bolt Diameter 1/4" 
Outside Anchor Diameter 3/8" 
Internal Thread Length 7/16" 
Brand Name CONFAST® 
Minimum Spacing 3-3/4" 
Maximum Torque 5 ft./lbs. 
Bolt Length Fixture Thickness + Embedment Depth 
2000 PSI Concrete - Pull-Out (lbs.) * 704 
Length Measurement End to End 
Diameter 1/4" 
Length 1" 
Material 316 Stainless Steel 
Environment Submerged/Chemicals 
Type Female 
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Application Video 

Installation Video 
Installing a 1/4" (three one six) 316 Stainless Steel Drop-In Anchor 
  1. Drill a 3/8" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15. 
  2. The depth of the hole can be deeper or equal to the minimum embedment depth of 1" which is equal to the length of the anchor . 
  3. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb. 
  4. Insert the anchor into the hole with the open threaded end facing up. 
  5. Take the correct 1/4" (three one six) 316 Stainless Steel Drop-In Anchor setting tool and insert the smaller diameter end into the threaded portion of the 1/4" (three one six) 316 Stainless Steel Drop-In Anchor.  
  6. Strike the end of the setting tool with a hammer until the anchor is fully set. 
  7. The 1/4" (three one six) 316 Stainless Steel Drop-In Anchor is now set. A 1/4" diameter threaded rod or a bolt can be inserted into it with a maximum torque of 5 ft. lbs. 
  8. Always use proper personal protective equipment per manufacturer's and OSHA instructions. 

View AllClose

Additional Information

Bit Size:
3/8"
Minimum Embedment:
1"
Thread Type:
1/4" - 20
Primary:
Concrete only
Environment:
Submerged/Chemicals
2000 PSI Concrete - Pull-Out (lbs.) *:
704
Type:
Female
Diameter:
1/4"
Length:
1"
Material:
316 Stainless Steel
Box Qty:
100
Minimum Spacing:
3-3/4"
Minimum Edge Distance:
1-7/8"
Minimum Fixture Hole Diameter (In Place):
7/16"
Minimum Fixture Hole Diameter (Hole Spotted):
1/4"
Inside Anchor Diameter-Bolt Diameter:
1/4"
Outside Anchor Diameter:
3/8"
Internal Thread Length:
7/16"
Length Measurement:
End to End
Bolt Length:
Fixture Thickness + Embedment Depth
Brand Name:
CONFAST
View AllClose

Related Products

Related Products

Picture of 3/8" x 6" Hammer Bit, Each
Add to Cart
Quick view

3/8" x 6" Hammer Bit, Each

TruCut®

$12.53
Products Features TRICARB® CARBIDE:  Guarantees longer bit life and speedier penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN:  Faster dust removal allows...
Picture of 3/8" x 6-5/8" SDS Bit, Each
Add to Cart
Quick view

3/8" x 6-5/8" SDS Bit, Each

TruCut®

$14.99
Products Features TRICARB® CARBIDE:  Longer bit life and quick penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN:  Faster dust removal provides faster...