CONFAST®
1/2" x 2-3/4" Strike Anchor, 50/Box
- SKU:
- SA12234
- UPC:
- 820274001158
- Availability:
- Discontinued by the manufacturer, see page for alternatives.
Description
Products Features
- POSITIVE DRIVE: Use a hammer to drive the nail to expand the anchor
- POSITIVE SETTING: When the head of the nail meets the anchor body then the anchor is set
- CAN SET EMBEDMENT DEPTH: Provides uniformity and consistent look when all the anchors are set
- SLOTTED BODY IS PRECISION MATCHED TO TAPERED EXPANSION NAIL: Ensures that the anchor is uniformly expanded to provide consistent holding values in concrete
- NUTS AND WASHERS INCLUDED: Ready to install; creates simple and fast installation process
Products specifications
| Bit Size | 1/2" |
| Box Qty | 50 |
| Minimum Embedment | 2" |
| Wrench Size For Nut | 3/4" |
| Primary | Concrete only |
| Thread Type | 1/2" - 13 |
| Minimum Edge Distance | 2-1/2" |
| Maximum Fixture Thickness | 1/4" |
| Minimum Fixture Hole Diameter (In Place) | 9/16" |
| Minimum Fixture Hole Diameter (Hole Spotted) | 1/2" |
| Brand Name | CONFAST® |
| Minimum Spacing | 5" |
| Thread Length | 1" |
| 2000 PSI Concrete - Pull-Out (lbs.) * | 2700 |
| 2000 PSI Concrete - Shear (lbs.) * | 5400 |
| Length Measurement | End to End |
| Diameter | 1/2" |
| Length | 2-3/4" |
| Material | Carbon Steel Yellow Zinc |
| Environment | Dry |
| Type | Male |
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Additional Information
Bit Size: |
1/2" |
Minimum Embedment: |
2" |
Thread Length: |
1" |
Primary: |
Concrete only |
Environment: |
Dry |
Thread Type: |
1/2" - 13 |
2000 PSI Concrete - Pull-Out (lbs.) *: |
2700 |
2000 PSI Concrete - Shear (lbs.) *: |
5400 |
Type: |
Male |
Diameter: |
1/2" |
Length: |
2-3/4" |
Material: |
Carbon Steel Yellow Zinc |
Box Qty: |
50 |
Minimum Spacing: |
5" |
Minimum Edge Distance: |
2-1/2" |
Maximum Fixture Thickness: |
1/4" |
Minimum Fixture Hole Diameter (In Place): |
9/16" |
Minimum Fixture Hole Diameter (Hole Spotted): |
1/2" |
Wrench Size For Nut: |
3/4" |
Length Measurement: |
End to End |
Brand Name: |
CONFAST |
Related Products
Related Products
1/2" x 2-3/4" Wedge Anchor Zinc Plated, 25/Box
CONFAST®
$19.79
Products Features
ZINC PLATED: Helps prevent rust in dry environments; dependable application and maintenance
WIDE RANGE OF SIZES: Ensures correct fastener for...
1/2" x 3-1/2" Strike Anchor, 15/Box
CONFAST®
$36.90
Products Features
POSITIVE DRIVE: Use a hammer to drive the nail to expand the anchor
POSITIVE SETTING: When the head of the nail meets the anchor body then the anchor is...
1/2" x 6" Hammer Bit, Each
TruCut®
$15.75
Products Features TRICARB® CARBIDE: Guarantees longer bit life and speedier penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN: Faster dust removal allows...
1/2" x 6-5/8" SDS Bit, Each
TruCut®
$20.78
Products Features TRICARB® CARBIDE: Longer bit life and quick penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN: Faster dust removal provides faster...