CONFAST®
1/2" Coil Drop-In Anchor Zinc Plated, 50/Box
(No reviews yet)
Write a Review
- SKU:
- DICA12
- UPC:
- 820274000427
- Availability:
- In Stock, Ships Today!
Description
Products Features
- SMOOTH WALL DESIGN: Provides contact along length of expansion area; provides consistent holding values; aesthetic appeal
- INTERNAL NATIONAL COARSE THREADS: Common threads create easier selection of threaded rod or bolt
- IDEAL FOR FLUSH MOUNTING: Nothing protrudes above surface of the concrete once anchor is properly installed
- MOST CONSISTENT HOLDING VALUES: Can be used in solid concrete as an internally threaded concrete fastener
- SLOTTED BODY IS PRECISION MATCHED TO TAPERED EXPANSION PLUG: Ensures that the anchor is uniformly expanded to provide consistent holding value
Products specifications
| Bit Size | 5/8" |
| Box Qty | 50 |
| Minimum Embedment | 2" |
| Primary | Concrete only |
| Thread Type | Coil |
| Minimum Edge Distance | 3-1/8" |
| Minimum Fixture Hole Diameter (In Place) | 11/16" |
| Minimum Fixture Hole Diameter (Hole Spotted) | 1/2" |
| Inside Anchor Diameter-Bolt Diameter | 1/2" |
| Outside Anchor Diameter | 5/8" |
| Internal Thread Length | 13/16" |
| Brand Name | CONFAST® |
| Maximum Torque | 20 ft./lbs. |
| Bolt Length | Fixture Thickness + Embedment Depth |
| 2000 PSI Concrete - Pull-Out (lbs.) * | 2328 |
| Length Measurement | End to End |
| Diameter | 1/2" |
| Length | 2" |
| Material | Carbon Steel Zinc Plated |
| Environment | Dry |
| Type | Female |
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Installation Video
Installing a 1/2" Coil Drop-In Anchor Zinc Plated - Drill a 5/8" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
- The depth of the hole can be deeper or equal to the minimum embedment depth of 2" which is equal to the length of the anchor .
- Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
- Insert the anchor into the hole with the open threaded end facing up.
- Take the correct 1/2" Coil Drop-In Anchor Zinc Plated setting tool and insert the smaller diameter end into the threaded portion of the 1/2" Coil Drop-In Anchor Zinc Plated.
- Strike the end of the setting tool with a hammer until the anchor is fully set.
- The 1/2" Coil Drop-In Anchor Zinc Plated is now set. A 1/2" diameter threaded rod or a bolt can be inserted into it with a maximum torque of 20 ft. lbs.
- Always use proper personal protective equipment per manufacturer's and OSHA instructions.
Additional Information
Bit Size: |
5/8" |
Minimum Embedment: |
2" |
Thread Type: |
Coil |
Primary: |
Concrete only |
Environment: |
Dry |
2000 PSI Concrete - Pull-Out (lbs.) *: |
2328 |
Type: |
Female |
Diameter: |
1/2" |
Length: |
2" |
Material: |
Carbon Steel Zinc Plated |
Box Qty: |
50 |
Minimum Edge Distance: |
3-1/8" |
Minimum Fixture Hole Diameter (Hole Spotted): |
1/2" |
Inside Anchor Diameter-Bolt Diameter: |
1/2" |
Outside Anchor Diameter: |
5/8" |
Internal Thread Length: |
13/16" |
Length Measurement: |
End to End |
Bolt Length: |
Fixture Thickness + Embedment Depth |
Brand Name: |
CONFAST |
Related Products
Related Products
5/8" x 6" Hammer Bit, Each
TruCut®
$22.49
Products Features TRICARB® CARBIDE: Guarantees longer bit life and speedier penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN: Faster dust removal allows...
5/8" x 6-3/4" SDS Bit, Each
TruCut®
$27.50
Products Features TRICARB® CARBIDE: Longer bit life and quick penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN: Faster dust removal provides faster...