Articles

Purchase Tapcons The following information refers to the Tapcon brand cement anchor screw: Standard Sizes Diameter - the cement anchor screw comes in two standard diameters of 3/16” or 1/4” Length – the 3/16” diameter comes in  7 standard lengths of 1-1/4”, 1-3/4”, 2-1/4”, 2-3/4”, 3-1/4”,3-3/4” and 4” the 1/4” comes in 9 lengths of 1-1/4”, 1-3/4”, 2-1/4”, 2-3/4”, 3-1/4”,3-3/4”, 4’, 5” and 6”. Large Diameter Sizes Diameter- the large diameter cement anchor screws come in …

Purchase Double Expansion Anchors Applications Designed for use in solid concrete, brick, hollow block and solid block for medium to heavy-duty fastening. Design The double expansion anchor is designed with two wedges at opposite ends of the anchor. Once a bolt is inserted and rotated, the two wedges expand the anchor body evenly outwardly against the walls of the hole in the base material. The even expansion of the anchor body eliminates high-stress points, which makes it an ex …

Purchase Sleeve Anchors Parts A flat headed sleeve anchor is a special type of masonry fastener made up of four parts: an internal stud that is flared outwardly and cone shaped on one end with the other end threaded, a sleeve that fits over the internal stud, and a flat countersunk head that threads onto the stud. All parts of the flat-headed sleeve anchor are zinc plated and are packaged assembled. Working Principle The flat-headed sleeve anchor is an expansion-type anchor that …

Purchase Nylon Nail-It AnchorsApplications The 3/16” x 7/8” Mushroom Head Powers Fasteners Zamac Nailin anchor is designed for anchoring very thin and light material to normal weight concrete, hollow concrete masonry (CMU), brick masonry or natural stone.Listings Federal GSA Specifications are met by the Powers Fasteners 3/16” x 7/8” Mushroom Head Zamac Nailin listed as FF-S325C, Group V, Type 2, Class3 and CID A-A 1925A, Type 1.Material Specifications The materials used in the manufact …

Purchase Tapcon Anchors Configuration The flat end of the Tapcon drill bit is on the opposite end of the carbide tip and is the end of the bit that is inserted into the installation tool kit. This flat end of the Tapcon bit is aligned flat side out when inserted into the installation toolkit so that a set screw can be tightened against it, holding the Tapcon bit tightly in the installation tool. Standards Any carbide tipped masonry bit that is manufactured to meet ANSI standa …