CONFAST®
1/4" x 2-1/2" Stainless Steel Hammer Drive Anchor, 100/Box
(No reviews yet)
Write a Review
- SKU:
- HDS14212
- UPC:
- 820274003640
- Availability:
- In Stock, Ships Today!
Description
Products Features
- INSTALLS IN A VARIETY OF BASE MATERIALS: Can be used in a variety of applications; job will be easier and faster
- MUSHROOM HEAD: Lager bearing surface provides improved pullover characteristics
- ANCHOR DIAMETER IS HOLE DIAMETER: Creates easily determined hole size for simple application process
- ALL SIZES PACKAGED 100 PIECES PER BOX: Standardized quantity amount for purchase planning and usage
- PERMANENT FASTENING: Once installed, fastener cannot be removed; very secure
Products specifications
| Bit Size | 1/4" |
| Box Qty | 100 |
| Minimum Embedment | 3/4" |
| Head Type | Mushroom |
| Minimum Edge Distance | 1-1/4" |
| Maximum Fixture Thickness | 1-1/4" |
| Minimum Fixture Hole Diameter (In Place) | 5/16" |
| Minimum Fixture Hole Diameter (Hole Spotted) | 5/16" |
| Brand Name | CONFAST® |
| Minimum Spacing | 2-1/2" |
| 2000 PSI Concrete - Pull-Out (lbs.) * | 405 |
| 2000 PSI Concrete - Shear (lbs.) * | 450 |
| Length Measurement | Underneath head |
| Diameter | 1/4" |
| Length | 2-1/2" |
| Material | Zamac body - 304 Stainless steel nail |
| Environment | Wet |
| Type | Male |
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Installation Video
Installing a 1/4" x 2-1/2" (two and one half inches) Stainless Steel Hammer Drive Anchor
- Drill a 1/4" hole into the concrete using a carbide tipped bit that meets ANSI Standards B212.15.
- Drill the hole a 1/2" deeper than the anchor will penetrate the concrete, making sure the minimum embedment requirements of 3/4" is met.
- The hole can be drilled while the fixture is in place. The minimum hole in the fixture for the 1/4" x 2-1/2" (two and one half inches) Stainless Steel Hammer Drive Anchor is 5/16".
- Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
- Insert the 1/4" x 2-1/2" (two and one half inches) Stainless Steel Hammer Drive Anchor, slit end first, through the material to be fastened and into the hole, ensuring that the bottom of the head is sitting flush with the fixture plate.
- Hammer the nail flush into the head of the anchor body.
- Always use proper personal protective equipment per manufacturers and OSHA instructions.
Additional Information
Bit Size: |
1/4" |
Minimum Embedment: |
3/4" |
Type: |
Male |
Material: |
Zamac body - 304 Stainless steel nail |
Environment: |
Wet |
2000 PSI Concrete - Pull-Out (lbs.) *: |
405 |
2000 PSI Concrete - Shear (lbs.) *: |
450 |
Diameter: |
1/4" |
Length: |
2-1/2" |
Box Qty: |
100 |
Minimum Spacing: |
2-1/2" |
Minimum Edge Distance: |
1-1/4" |
Maximum Fixture Thickness: |
1-1/4" |
Minimum Fixture Hole Diameter (In Place): |
5/16" |
Minimum Fixture Hole Diameter (Hole Spotted): |
5/16" |
Head Type: |
Mushroom |
Length Measurement: |
Underneath head |
Brand Name: |
CONFAST |
Related Products
Related Products
1/4" x 2" Hammer Drive Anchor, 100/Box
CONFAST®
$40.61
Products Features INSTALLS IN A VARIETY OF BASE MATERIALS: Can be used in a variety of applications; job will be easier and faster MUSHROOM HEAD: Lager bearing surface...
1/4" x 6" Hammer Bit, Each
TruCut®
$7.50
Products Features TRICARB® CARBIDE: Guarantees longer bit life and speedier penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN: Faster dust removal allows...
1/4" x 6-5/8" SDS Bit, Each
TruCut®
$13.85
Products Features TRICARB® CARBIDE: Longer bit life and quick penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN: Faster dust removal provides faster...
1/4" x 2" Split Drive Flat Zinc Plated, 100/Box
CONFAST®
$25.43
Products Features
TAMPERPROOF: Anchor cannot be removed; provides security for item being attached
FLAT COUNTERSUNK HEAD: Ideal for fastening wood to concrete where head...
1/4" x 2" Split Drive Round Zinc Plated, 100/Box
CONFAST®
$27.85
Products Features
TAMPERPROOF: Anchor cannot be removed; provides security for item being attached
FLAT COUNTERSUNK HEAD: Ideal for fastening wood to concrete where head...
1/4" x 2" Nylon Nail-It Flat Head, 100/Box
CONFAST®
$15.00
Products Features
LIGHT DUTY: Ideal for small anchoring jobs
ANCHOR BODY IS MADE FROM A NYLON MATERIAL: Anchor body will not rust and this provides...
1/4" x 2" Nylon Nail-It Mushroom Head, 100/Box
CONFAST®
$15.00
Products Features
LIGHT DUTY: Ideal for small anchoring jobs
ANCHOR BODY IS MADE FROM A NYLON MATERIAL: Anchor body will not rust and this provides...